Learn About Interactive Elai Videos

Modified on Tue, 17 Nov at 1:38 PM

Overview

Interactivity turns a video from something your viewers watch into something they take part in. Instead of playing straight through, your video can pause for a question, wait for a choice, or send each viewer to a different slide depending on what they pick. For training, onboarding, and classroom content, this lets you check understanding as you go rather than hoping the material landed.

All of Elai's interactive tools sit in one place in the video editor. You can add quizzes that viewers answer on screen, have Elai write those quizzes for you from content you have already created, and add buttons, hotspots, or clickable media that jump to another slide or open a web page. You can also set chapters for easy navigation, control how freely viewers move through the video, build branching paths so that the route through your video depends on the answers your viewers give, and see how people watched through video analytics.

This article covers the interactive elements you can place on a slide, how branching works, how AI Quiz Generation builds questions for you, and what happens when you bring an interactive video into Panopto.

Prerequisites

  • Verified account

  • A paid subscription is required for image-based quizzes, multi-select answers, and AI Quiz Generation




Interactive Elements in Your Video

Elai gives you five interactive capabilities to build into a video: quizzes, buttons, hotspots, branching, and video analytics. 

  • Quizzes come in text-based and image-based formats with single-select or multi-select answers. 

  • Buttons and hotspots give your viewers something to click. 

  • Branching sends each viewer down a path of their own. 

  • Video analytics shows you how people watched. 

You will find some of them in the Interactivity tab on the right-hand sidebar of the video editor.




Text-Based Quizzes

Quizzes are single-choice or multiple-choice questions your viewers answer inside the video. A quiz appears either at the end of the slide it belongs to or at the end of the whole video, and you decide which slide comes next based on whether the answer was correct.

To build one, open an existing slide or create a new one, then open the Interactivity tab on the right-hand sidebar. From there, you have two ways to go:

  • Write the quiz yourself

  • Let Elai generate one automatically from the content of your slide or your whole video

AI Quiz Generation is the automatic route. Elai reads your slide or your whole video, writes the questions, and marks the correct answers, so you get a knowledge check without drafting one. You choose how many questions to create, where they land in the video, and what format they take, and every generated question becomes an ordinary quiz slide you can edit afterwards. AI Quiz Generation is available on the Enterprise plan. For the full walkthrough, see Learn About AI Quiz Generation.


To write a quiz yourself, click Text-based, pick the design you prefer, type your question, and fill in the answer fields. 

You can have between two and six answers per question, and you mark the correct ones with a green check. More than one answer can be marked correct, and a viewer's response counts as correct only when their selection matches your checkmarks exactly. Anything else is treated as incorrect.

Once your answers are set, choose the slide a correct answer leads to and the slide an incorrect answer leads to. You can also turn on Feedback for each outcome, which shows the viewer a pop-up as soon as they submit. A correct answer gets a green check, and an incorrect answer gets a red X. Feedback is optional.

Note: Multi-select answers are available on the Team and Enterprise plans.


Image-Based Quizzes

Image-based quizzes work exactly like text-based ones, except that viewers choose an image rather than a line of text. Click Image-based instead, then build the question the same way.

To add the pictures, click an answer and pick where its image comes from. 

Upload uses an image already saved in your assets, Stock opens a royalty-free image library with a search bar, and AI generation creates a new image from a prompt, with options for style, color, framing, and lighting. You can also set a size and add a negative prompt describing what you do not want to appear. 

Images you generate are saved to your assets, so you can reuse them in My Assets later. You can mix sources freely across the answers in a single question.

You can switch a slide between the image-based and text-based formats at any time. 

Note: Image-based quizzes are available on the Enterprise plan.


Buttons and Clickable Elements

Clicking a button redirects your viewer to the slide you linked it to, or opens the link you set in a new tab. Once the avatar has finished speaking, the video pauses and waits for the viewer to click. That makes buttons a good fit for a menu slide where viewers choose their own topic, or for a call to action at the end of a video.

To customize a button, right-click it and select Ungroup, or press Command, Shift, and G together. The button splits into its shape and its text so that you can restyle each part on its own. Select the shape to change its fill color or apply a gradient, and to adjust border width, border color, border radius, and opacity in the Elements menu. Select the text to change the wording and its formatting.

When you have finished, select both parts, right-click, and choose Group, or use the same keyboard shortcut. Ungrouping switches the interactivity off, so turn Interactivity back on in the Elements menu and set the destination again.

Any media, element, or text on your slide can become an interactive element. Click the image or text you want to use, turn on Interactivity in the Elements menu, and choose Go to the slide to send viewers elsewhere in your video or Open a link to point them at an external page. Then select the destination slide or paste in the web address.

Important! Each slide holds either a quiz or a button. Only one quiz is allowed per slide, and a quiz and a button cannot share the same slide.


Hotspots

Hotspots are clickable areas you add to your video, and they are available on every Elai plan. Like quizzes and buttons, they are built in the Elai editor, and they keep working for your viewers when you export the video to Panopto.



Chapters and Viewer Navigation

The Slide settings part of the Interactivity tab controls how your viewers find their way around the finished video.

Chapters give each slide a name your viewers can navigate by, so they can see what a slide is about and jump straight to the section they want. Turn on Slide chapter and type the name into the Add chapter name here field. 

In the rendered video, your viewer sees that name when they hover over the timeline. Name a chapter for every slide, or only for the ones worth jumping to. Chapters are optional, and they work on their own, so you can use them in a video with no interactive elements at all.

Your viewers can always see where the interactive moments are, because quizzes, buttons, and clickable elements are marked on the video progress bar with a lightning symbol.

When you are ready to render, you will see one more option: Disable slide navigation. Turning it on means your viewers move through the video only by using the interactive elements, so they cannot jump to another chapter or fast-forward. This is worth using when you want everyone to see a particular section rather than skipping past it.



Previewing and Rendering

Interactive elements become clickable once your video has been rendered. You cannot run a quiz in the editor, so render the video before you test your questions and the paths between your slides.

Your rendered video is fully interactive when you make it public and share the link, and when you embed it on your website. A downloaded MP4 copy played on your computer keeps the video, but the buttons and links will not respond.


Video Analytics

After rendering the video, you can access video analytics that show you how people actually watched it: how many saw it, how long they stayed, and how far they got. It is available on every Elai plan.

Note: Analytics are available only for published videos. 

Click the analytics icon on the preview page to see how your video is performing over a period you select:

You can set the date range and view total views over time. The metrics are grouped into three sets.

  • Reach: Impressions, view rate, total views, and unique viewers.

  • Watch Time: Average and total watch time.

  • Engagement Depth: Average percentage watched and completion rate.



Interactive Branching Scenarios

Branching lets each viewer take a different path through your video instead of watching it from start to finish. One video can then work as a quiz, an onboarding flow, or a short course that adapts to the person watching.

Three tools create a branch.

  • Quizzes route viewers according to the answer they give.

  • Buttons let viewers choose a path for themselves.

  • Next slide, in Slide settings, moves everyone past a block of slides that belongs to another path.

Most branched videos use a mix of all three, and the paths they create usually take one of four shapes: a loop back over material until the viewer answers correctly, a branch with a different outcome for each answer, an advanced branch where both paths rejoin at a shared conclusion, or a complex branch that combines all of these across a longer course.

As your video grows, the branching scheme view shows the whole structure at a glance, with every slide as a block and connections showing where each answer and each button leads.

For the full walkthrough, including worked slide numbers for each pattern, see Learn About Interactive Branching Scenarios.


Interactive Videos and Quizzes in Panopto

If your organization uses Panopto, you can build an interactive video in Elai and export it straight to your Panopto site, where your viewers watch and interact with it in the Panopto Viewer.

To export, open the More menu on your video in the Elai library and select Export to Panopto, or select Watch in the editor and then Export to Panopto. Choose a destination folder and click Export. Processing takes a few minutes. You can also select Copy code from the Share menu to embed the video elsewhere.

A few points to plan around before you export.

  • Quizzes, buttons, and other interactive elements keep working in Panopto, but editing stays in Elai. To change anything, edit the video in Elai first.

  • Quiz results are recorded by Elai, and you read them through a SCORM export or in your LMS. See Learn About SCORM Export.

  • Burn-in subtitles carry across. WebVTT and SRT subtitle files do not currently import.

  • Videos must stay within 500 minutes, 100 slides, and a slide duration of 5 minutes.

AI Recast turns a full-length Panopto recording into a short Elai video built from the recording's transcript. Once the summary exists, you can run AI Quiz Generation on it like any other Elai video, which is a quick way to add knowledge checks to a lecture capture. Create the summary first, since Recast videos are built from a transcript rather than from existing slides. For creating summaries, see How to Create a Video Summary Using Elai. 

For the full export steps with screenshots, see How to Use Elai with Panopto. 

For general information about using the two platforms together, see Learn More About Panopto and Elai.





FAQ

Can I test my interactive elements before rendering? 
Not by clicking them. The editor preview asks you to emulate clicks to move between slides, and the elements become clickable once the video has been rendered.

Will my interactive elements work if I download the video? 
No. A downloaded MP4 keeps the video, but the buttons and links will not respond. Interactive elements are supported in the Elai player, so share your video through a public link or embed it on your website.

How many answers can a question have? 
Between two and six. You can mark more than one answer as correct, and a viewer's response counts as correct only when their selection matches your checkmarks exactly.

Can I turn an image or a piece of text into a button? 
Yes. Click the element, turn on 
Interactivity in the Elements menu, and choose whether it goes to another slide or opens a link.

Can a viewer be sent back to an earlier slide? 
Yes. Point the incorrect answer at an earlier slide, and the viewer loops back over that material until they answer correctly.

How many questions can AI Quiz Generation create at once? 
Up to ten per request, or leave the setting on 
Auto and let Elai choose the right number for your content.

Can I regenerate a quiz if I do not like the results? 
Yes. Select 
Regenerate all in the review window. Each request creates unique questions, so you will not see the same version twice.

Where can I see quiz results? 
Quiz results are read through a SCORM export or in your LMS. See
 Learn About SCORM Export.

Do my interactive elements still work after exporting to Panopto? 
Yes. Panopto supports playback of Elai videos containing interactive elements. 

Can I see how people watched my video? 
Yes. Video analytics reports reach, watch time, and engagement depth, and they are available on every plan.


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article